Mise en page onglet help

This commit is contained in:
Alex committed 2026-09-27 11:37:02 +02:00
1 parent 8aa057e40c
commit ec155d775f
7 files changed
+86 -276

No files matched your search

+14 -33
View File
@@ -103,41 +103,22 @@
</page>
<page name="help" gui-text="Help">
<label xml:space="preserve">1. Print the 4 markers (Board photo: print
calibration markers, A4 sheet) and stick
them at the corners of the honeycomb.
2. Lay the board on the bed and take a photo
from above showing the 4 markers.
3. With nothing selected, choose the photo
file, or the address of the remote camera
(capture server), and apply: the photo is
straightened and
placed at the exact scale of the work area,
with the board outline and holes.
4. Draw or place the shapes in the "Cuts"
layer, on the board, then export them with
"Export to LaserGRBL".
If the markers are not found, the raw photo
is placed with 4 red targets: move them onto
the marker centres, select the layer content
(Ctrl+A) and apply again.
Markers around the honeycomb (default): stick
the 4 printed pieces so that the inner corner
of each piece touches a corner of the
honeycomb, the two-dot marker at the bottom
left. The bottom left corner of the honeycomb
is then the laser origin, i.e. the bottom left
of the page, as expected by the export to
LaserGRBL.
Coordinates are in mm from the laser origin
(bottom left of the work area).</label>
<separator/>
<!-- Schéma généré par docs/schema_parametres.py, en anglais :
Inkscape ne traduit pas le chemin d'une image. -->
<image width="900" height="694">images/parameters_en.png</image>
<image width="675" height="521">images/parameters_en.png</image>
<separator/>
<!-- Un paragraphe par ligne : Inkscape le replie à la largeur de
l'onglet ; des retours à la ligne forcés le laisseraient étroit. -->
<label xml:space="preserve">1. Print the 4 markers (Board photo: print calibration markers, A4 sheet) and stick them at the corners of the honeycomb.
2. Lay the board on the bed and take a photo from above showing the 4 markers.
3. With nothing selected, choose the photo file, or the address of the remote camera (capture server), and apply: the photo is straightened and placed at the exact scale of the work area, with the board outline and holes.
4. Draw or place the shapes in the "Cuts" layer, on the board, then export them with "Export to LaserGRBL".
If the markers are not found, the raw photo is placed with 4 red targets: move them onto the marker centres, select the layer content (Ctrl+A) and apply again.
Markers around the honeycomb (default): stick the 4 printed pieces so that the inner corner of each piece touches a corner of the honeycomb, the two-dot marker at the bottom left. The bottom left corner of the honeycomb is then the laser origin, i.e. the bottom left of the page, as expected by the export to LaserGRBL.
Coordinates are in mm from the laser origin (bottom left of the work area).</label>
</page>
</param>